Fuzzy Skin Test Block Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray to store the Fuzzy Skin Test Blocks
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 124
- Wydruki
- 2
- Wyświetlenia
- 624
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Fuzzy Skin Test Blocks were originally intended just as a side project with a few pieces. But this escalated a bit.
That is why i designed this tray to store them in a neat fashion. I've included a few variations. the 6x15 is for the full set - but realistically especially the 0.1 and 0.2 mm skin thickness don't differ that much, also the larger skin point distance variations are not usefull in many instances - so the 4x8 or 5x10 tray should be sufficient
if you need a specific size, just drop me a line
Printing
Just flat on the build surface with your preferred default settings, no supports needed