Sundvik Changing table holder for dry wipes and diaper bags
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Addon holder for Sundvik changing table to hold dry wipes and diaper bags
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a holder for our changing table to hold / store dry wipes and diaper bag rolls, but could not find any, so i designed this.
This will fit a whole pack of dry wipes wich are commonly available in grocery stores in norway (10x10cm, 100pack) and one roll of diaper bags, also common size in norway's grocery stores. it will also hold one bag when you do diaper change duty :D
I highly reccomend to use a nozzle of 0.6 or 0.8, or this will take long time to print (11.5 hours with my settings)
Same settings with 0.8mm nozzle @ 0.48mm layer hight, 4 walls, organic support and 30% adaptive cubic infill is only 4.5 hours.
I printed with 0.6mm nozzle, took about 6.5 hours. i forgot to add brim, so my corners lifted abit, so i reccomend brim if you print with PLA
its probably best to print this in PETG or something similar, but my wife wanted this in white, so i will print with eSUN PLA+ white, will upload pictures after its finished