Mako Jetboard / JetSurf - Rack / Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi I designed a stand for a buddy for his mako slingshot jetboards.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 166
- Wydruki
- 0
- Wyświetlenia
- 1447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi
I designed a stand for a buddy for his mako slingshot jetboards. I haven't tested it yet but I think it should fit so well. I will print the parts in the next days and test them.
The base of the stand is about 400 x 400mm. The height is about 880mm.
Two 11mm rubber buffers are glued to the upper support directly underneath the jetboard.
You need:
- Printed parts ;-)
- 4x screws 3,5x12 or 3,0x12 ( to screw the upper support together.)
- 4x screws 3,5x45 or 3,5x50 ( to squeeze the foot )
- 4x aluminium tube length 1000mm outer diameter 16mm wall thickness 2mm
- 4x 11mm rubber buffers
Note:
- The holes for the screws must be drilled exactly in the middle of the aluminum rod.
ALSO INTERESTING
Happy printing
MFG
Chris
Follow me on...
prusaprinters.org
thingiverse
Instagram
If you like it ;) - Thx for me!
www.paypal.me/schiffersoft
Print instructions
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.15
Infill: 35% & 50%
Filament: dasFilament.de PLA