Prusa Bear - Y-rod holder - no zip tie - no support - M3 heat set insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a (further) model of a holder for 8mm guides y axle on the bear upgrade. However, my work includes 3D corrections.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Grégoire Saunier and his colleagues have done an ingenious job and developed a unique upgrade project for a Prusa MK. As with every design, there is still potential for optimization in some areas for my application.
What did I do?
- Optimized the 3d model of the y rod holder and removed the 3d errors / artifacts.
- The rod can be fixed with a cover instead of cable ties.
- Fixation is designed for screwing with M3 screw in M3 heat inserts from ruthex.
Print settings are identical to Grégoire Saunier's recommendations. See
https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/dev/doc/print_settings.md
Have fun printing and assembling!