Customizable Soldering Kit Helper Hands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A selection of soldering platforms, with 2 or 4 helping hands built in - customizable lengths!
- Ocena
- 5 / 5
- Polubienia
- 240
- Pobrania
- 615
- Wydruki
- 4
- Wyświetlenia
- 2967
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
- Pick your platform (small, wide, 2 arm, or 4 arm)
- Pick your clamp (see notes below)
- Pick your arm length (recommend 8-10 pieces per arm)
- Enjoy!
Notes:
Soldering Clamp - Off Buildplate - This Clamp, if laid parallel to the buildplate will print with 1-2 layers of support needed. This helps reduce risk of elephants foot fusing the clamp together, but makes one side unsightly and require cleanup.
Soldering Clamp - Touching Buildplate - This Clamp is slightly thicker and may need an exacto-knife to release any fusing that occurs on the build plate side.
See the additional notes on the Arm pieces - whichever you choose, while the vertical orientation doesn't require supports, the clipping mechanisms I found snap off too easily. I printed many of mine in a horizontal orientation which provided much better strength.
