IR Sensor Holder for MK3S+ with MMU2S - Increased Adjustable Length
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added more adjustable length to the two M3 screw holes to allow more calibration room.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 132
- Wydruki
- 3
- Wyświetlenia
- 1033
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I kept having issues with the IR Sensor calibration on the MMU2S after the MK3S+ upgrade. To get the sensor to read 1, the holder/chimney had to be pushed all the way to the right and then some. The reading kept fluctuating between 0 and 1 and I consistently had load failures as it was a 50/50 if the sensor would read 0 or 1 at filament load.
I modified the IR Sensor Holder for the MK3S+ (only MK3S+, the holder is different from regular MK3S) to have more length to the adjustable M3 screw holes on the IR Sensor Holder/Chimney. This should allow you to move it more right if needed on your setup.