Parametric Bobbin Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bobbin holder with slots for thread retention and customizable via the fusion model.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 270
- Wydruki
- 5
- Wyświetlenia
- 1028
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a bobbin holder I designed for my mom, who had a commercial solution that wasn't doing it for her. This design retains the bobbins, while adding a slot to retain the thread.
I've uploaded the 21 and 27mm examples, but other sizes can be accommodated via the included Fusion model. Under-sizing the diameter by a millimeter makes for nicer retention. Printing this in TPU is almost certainly a must. I haven't tried other materials since I targeted the flexibility of TPU.
The slot may be difficult for some printers/filaments, but generally I've been able to cut through any unintentional bridging with the thread itself.