1 / 2
AZ-1 Window Handle — zdjęcie 1
1 / 2

AZ-1 Window Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This window handle replaces the stock handle and is low profile such that it creates more room for taller drivers.

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
156
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This window handle replaces the stock handle and is low profile such that it creates more room for taller drivers. You will simply remove the stock handle and reuse the spring clip. The spring clip will temporarily be captured in an installation position on the handle. Then place the handle over the spline and use a flat head screwdriver to further engage and drive the spring clip into the annular channel on the spline shaft to the secured position.  Installation takes seconds, literally.  One more thing, I have a very thin bit of material in the gap to help the print, so take an exacto knife and cut out the extra material to open the gaps the spring clip goes through.  

Tagi