Gridfinity 33mm Thread Spool Holder 3x4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 12 spools of thread that are 33mm diamater.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 524
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Holds 12 spools of thread that are 33mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 33.5mm to easily hold a 33mm spool.
Went with a more minimalist approach. Extruded circles out from baseplate instead of cutting circles into a thicker baseplate. Removed brim.
Version 2 is more minimalist, print separate from the legs, print 4 legs, glue legs to corners. This design is meant to stay in the drawer/location, if you need it stronger, glue on more legs, in the middle.
Enjoying adding on to the wonderful creation of Zack Freedman's Gridfinity
Gridfinity Tips!
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corner