Printable Bed Scraper With Replacable Blades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cheap, easily printable bed scraper with changeable to avoid damaging your glass or PEI bed.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 1071
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I recently changed all my printers from coated glass to double sided PEI, PEO, PET, PEY (ect.); as I was sick of the coatings wearing off, causing it to loose adhesion. Prints flex off the spring steel beds with ease however brims and skirts can be a little stubborn at times and I'd prefer to avoid touching the bed as I'd prefer to avoid cleaning it between every print. For obvious reasons using the metal scraper I have is a bad idea on beds such as PEI.
There I arrived at a problem, there are many printable scrapers available to be printed but only a few have interchangeable blades and use a “clip” to fit them to the handle. I wanted something that looks a little more elegant and with a more secure, long term solution to mounting.
And so a half hour of CAD and I arrived at this solution.
Hardware:
- 2 x Counter sink M3 bolts 8-16mm
- 2x M3 insert maximum of 6mm height. Recommended OD of 5mm but you should be able to get away with 5.5 OD also
Print Settings:
It doesn't really matter it's just a case of how long you want it to last, how “solid” you want it to feel and what you can print with. Bellow are just my recommended settings
- Material - ABS
- Infill - 100%
- Supports - No
- Brim - No
The blades only take about 8g of filament on 100% infill so they're a great way to use up your old filament