25.4mm calabration Coin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
25.4mm calibration Coin Notes: this is designed to be carried around and placed in photos to calibrate the image at a…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
25.4mm calibration Coin
Notes:
this is designed to be carried around and placed in photos to calibrate the image at a later date to work out actual dimensions of items you may not own
print Settings:
nozzle diameter: 0.40mm
layer height: 0.16mm
infill: 25%
support: NO
walls: thickness or at least 1.0mm
top and bottom layers: 3 to 4
material: PLA
Parts Needed:
NONE
Special Instructions:
NONE
please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter\_383/designs
please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones
https://paypal.me/3DCarter383?locale.x=en\_GB
Links:
printer: https://tinyurl.com/whd9ruaj
filament: https://tinyurl.com/pr7d5cs6
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
200
Infill:
38
Filament:
PolyMaker PETG
Category: Other