Protective cover for DC Binding Posts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flex protective hoods for the backside of DC binding posts, used to recharge batteries or connect wire terminals.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I made a battery pack using an ammo box and a 12V, 4S LiFePO4 set of cells. The box came out great and is since used regularly for my outdoor astronomy activities.
I bought two binding posts to recharge the battery with the usual ring or fork flat terminals. My issue was that on the backside of the posts, inside the ammo box, I had two bare, uninsulated M8 bolts and nuts.
The solution was to print two TPU covers, pressure-fitting these bolts and the terminals. The covers came out really well.
I printed them on a Prusa original Mini with a Sunlu TPU filament at 240°C, 60°C bed, 20 mm/s, 0.2 layers and 10% gyroid infill.