TTVR Cradle for bare Samsung Note4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cradle to hold a Samsung Note4 (no case) and snaps into the TTVR modular virtual reality heasdset…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
This is a cradle to hold a Samsung Note4 (no case) and snaps into the TTVR modular virtual reality heasdset (http://www.thingiverse.com/thing:733390). It is very important that the corners not lift during print since the dimensions are precise and the phone won't fit it it is allowed to curl during print. To help accomplish a good print, I added a custom brim to help hold the corners down. Print with 0.2mm layer height.
I added a 2nd version with a larger cutaway on the bottom. This makes it easier to remove the phone and also reduces the tendency of the part to lift during print.
Category: Mobile Phone