1 / 3
Light for Ender 3 v3 SE or KE
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic style
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 1846
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (49)Powiązane
The edges fit into the printer without additional fasteners.
The space for LED strip 325x12mm
tunnel for cable 3x4mm.
Optionally:
You can glue the seam, connected by dovetail grooves
Slide switch 2 positions like SS12D00 (Handle length 3mm+)
I'll also add a 3D model that will help you to neatly connect to the standard Creality display connector. For this you will need:
3D model (because the connector remains inside the housing, it is necessary to protect other unused contacts)
bh-10-g connector
the necessary tools in the form of a soldering iron, heat shrinkage, wires
schematic
