1 / 2
Laced placemat Doily
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A cool placemat that mimics the looks of a laced one made from fabric. perfect for your mom or grandma!
This is not an easy print! it requires a very leveled bed with a good adhesion and a good retraction.
Print with 0.2mm layer height, it is a total of 2 layers (0.4mm thin)
I found the best results were using only 1 wall and regular lines top/bottom pattern. i tried concentric and lots of walls but it was looking like a spiderweb.
Bonus tip: use “Monotonic top/bottom order” setting in Cura or any other equivilant setting in your slicer to reduce the lines pattern in the flat part.