Washing Machine Drain Collector 2 to 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fit the drain pipe 38mm ID and 48mm OD, and drain hose with 32mm ID and drain hose with 20mm ID.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 870
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I have two washing machines, one is top load washer for dirty stuff and one is front load washer for normal clothes. But I only have one drain pipe in my garage. So I created this model.
Dimension of my house's drain pipe for washing machine is 38mm ID and 48mm OD
Inner diameter of top load washer drain hose is about 32mm and front load washer drain hose is about 20mm.
I created this model to connect two drain hoses to one drain pipe.
I printed with PLA 20% infill and its working fine even with warm water washing.
I know this is a super niche product. But in case someone is trying to solve the same problem.