Remix refined for 0.3 and 0.2 resolution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I print in 0.3 and 0.2 resolution only so i refined the model to support that.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
I changed the bridge thickness to 0.3 and 0.4 (separate models) and changed the numbers on the side from cool to hot plus added one for PETG ( it does not bridge well, but it helps find the heat range ). I also legthened the little bar between the printed heat ranges to help define it more ( old eyes ).
The outer smallest bridge was changed to 0.2 on all models (single layer always).
I added notes on the side and top to remind me of the details without loading it in CAD to measure.
The notes are so small they dont print well, but it is only to read while in the slicer.