"The Strenchies" a stretched #3DBenchy collection, wide, long and tall Benchy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collection of stretched #3DBenchies (original model by Creative Tools), stretched to 200% in each dimension.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 590
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The popular 3D printing test model deformed to its utmost absurdity. The new 3D print torture test gang is calling themselves "The Strenchies" which have wreak havoc amongst the benchy population and are now coming to infiltrate your collection aswell.
This is a modified version of the most popular 3D printer test object, the "3D Benchy" by Creative Tools (original model on Thingiverse, https://www.thingiverse.com/thing:763622). Each of the gang members were stretched 200% in either X, Y or Z directions but compensated in another dimension to retain the same volume as the original. Therefore the amount of material and print time is roughly the same as for the standard 3DBenchy.
Overview and printing tips
The "Tall Boy":
Traits:
- can see farther than you ever will
- intimidates its enemy from above
Printing tips and info:
- print time approx. 58 min @ 0.2 mm (with prepare time), 14.0 g
- requires a brim since the contact area to the buildplate turned out somehwat small
The "Wide Boy":
Traits:
- does not fit the door sometimes
- can (and will) push you over, including everything around you
Printing tips and info:
- print time approx. 44 min @ 0.2 mm (with prepare time), 13.7 g
- benefits from some supports under the hull but is also fully printable without. Regardless, the underside will look somewhat horrible at 0.2 mm layer height.
The “Long Boy”
Traits:
- faster... definitely faster
- has significant advantage in sprint races
Printing tips and info:
- print time approx. 42 min @ 0.2 mm (with prepare time), 12.1 g
- the tip of the hull curls up during printing. The model is oriented in such a way, that the left-side auxillary cooling fan is blowing directly onto the tip. Otherwise prints normally and does not require any special treatment.
Used materials in my prints:
eSUN PLA matte white
eSUN PLA+ magenta
eSUN PLA+ yellow
GEEETECH PLA light blue
Printed with BambuLab P1S @0.2 mm layer height, 2 walls, 15% grid infill, arachne wall generator.