HP Windows Mixed Reality cable connection clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holds the cable on an HP Windows Mixed Reality headset together, so it won't disconnect while playing.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
I was having an issue where the cable on my HP Windows Mixed Reality headset disconnects frequently. Because I was expecting to make a few adjustments to it, I decided to lay out the shapes neatly in openscad to make it customizable.
The model assumes the two connectors are rounded rectangles, the smaller side is centered in the larger side, and each cable is centered on the end of its connector. In the variables, the “A” side is assumed to be larger than the “B” side.
AsideL is the length of the A side connector, in the direction of the cables
AsideW is the wider direction perpendicular to the cable
AsideH is the thinner direction perpendicular to the cable
AsideR is the rounding on the A side connector, read with a fillet gauge
AsideC is the diameter of the cable connection on the A side
WT is the wall thickness. The portion around the B side connector will be thicker than this.
All of the outside corners are square. If this causes issues in use, I'll round it off, but it usually is out of the way pretty well.