1 / 1
PEX pinch clamp go/nogo gage — zdjęcie 1

PEX pinch clamp go/nogo gage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a pex clamp go/no-go gage to verify your clamp tool is properly calibrated.

Ocena
0 / 5
Polubienia
0
Pobrania
24
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a pex clamp gage to verify your clamp tool is properly calibrated. the one that came with my apollo tool Model #69PTBJ0010C got lost so i made this one based on the specs from the manufacturer with a no/nogo sides of 1.2mm and 1.4 mm. the 1.4 shouldn't fit when clamped and the 1.2 should fit for proper calibration.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.14

Infill:

100

Filament: doesn't matter PLA doesn't matter


Notes:

I printed on highest resolution, 100% infill and slow speed for accuracy.

Category: Tools

Tagi