Rookery Wide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wider Rookery toolhead adds Micro Sherpa direct drive, PINDA, 4010 hotend fan and ADXL.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU Lesser General Public License
If you like the aesthetic of the original Rookery, but want to cram in a bunch more stuff, this might be the toolhead for you. Takes a rookery, makes it a bit taller, a lot wider, and a bit heavier. The tradeoff is you can fit a micro sherpa extruder, ADXL, 4010 hotend fan, and super pinda in there. You won't get the best possible airflow from this, but you will get something similar to the original Rookery.
This was created for the parts that come with Fabreeko's Rook Mk1 kit, and put in a Rook2020.
It will need a handful of M3 heated inserts, and a handful of M3 screws. A few more than the original. The side screws that secure the sides will need to be button head screws for X axis clearance reasons. For the rest, cap head screws are fine.
On my 2020, I have just managed to keep the full 120x120 print area. I am also using the fixed version of the micro sherpa, but I think both kinds will fit. It will NOT fit the mini-sherpa in the provided holes.
BE CAREFUL - Do not let the slicer fill the narrow air ducts with supports!