Cattiva Palworld Painted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
can be printed with 4 or 6 color printer.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 787
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
I uploaded painted versions of Cattiva from Palworlds. These are “untested” models. I tested that the model does print well but I did not do it in multi-color due to me not having decent colors.
Tested for bambuStudio and OrcaSlicer.
2 versions are Uploaded. One for a single AMS with a color swap mid-print and one for the ballers with 2 AMS units.
If you want to scale the Single AMS version you have to change the pause height as well.
Support is necessary.
How To Print On Single AMS:
- Load filament profiles
- Confirm pause is in the correct location
- Check flushing volumes:
You want to make sure that before you print the filament with the highest flushing volume is selected. This way, when you do change from color A to Color B, the flushing volumes are correct. - Start Printing.
- During the pause, change out the filament for the new color.
- Continue printing.
- During the pause, change out the filament for the new color.
- Finish printing!
If you do print this model, and would like to have your picture as the cover please let me know.