1.9 bead lock wheel for Axial SCX10 or Wraith. 12mm Hex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WORK IN PROGRESS. Just want to share. 1.9 Bead Lock Wheel Split into two pieces, thus no support required. However (5)…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
WORK IN PROGRESS. Just want to share.
1.9 Bead Lock Wheel
Split into two pieces, thus no support required. However (5) M3x6mm screws are required to secure the back to the front. (12) M2x10mm for the rings.
Rings for the wheel can be found here: Bead lock ring for Axial SCX10 by Kent Dixson | Download free STL model | Printables.com
or you can use stock Axial rings
Simple design I started and never worked on it long enough to get it the way I wanted. Can you guys make it any better?
Category: R/C Vehicles