Dominion Card Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Hobby Lobby Artist Box
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 2479
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
These are card holders I designed for use with the Hobby Lobby Artist Box. There are two versions, one that holds 8 sets of 10 cards (used for regular Action cards) and one with 7 sets of 12 cards (used for VP cards and other weirdly sized stacks).
To fit in the Hobby Lobby Artist Box place 5 8 slot boxes and one 7 slot box per vertical row. I place the 7 slot box in the back. In each row, make sure the front most slot is empty to allow the box to close without catching any cards.
I printed in PLA with 1 vertical parameter, 0% infill, and 1 top/bottom layer. The tolerances are fairly tight so print one and check to make sure your cards fit before printing a bunch.