7 Segment Display Segment Arduino GPS clock project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 7 segment Arduino GPS set clock project. The digits are very large ~15" or ~38mm.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 1080
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
This is 7 segment Arduino GPS set clock project. The digits are very large ~15" or ~38mm.
Materials:
Filament PLA is fine
WS2812 strips
Arduino Uno
I wanted to make it easy to set the time and using a GPS module allowed me to set the time very accurately without the fuss of NTP or connected via wifi to another device. It also allowed me to not require any buttons, or worry about resetting the time following power interruptions.
I am not a coder, but AI helped me write the arduino sketch and I have included it in the project file.
There are many other cool upgrades that can be made. Leave your ideas in the comments.