Raspberry Pi 3B+ Heatsink Case for Prusa MK3S (Rotated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifield Raspberry PI 3+ case for Prusa MK3/MK3S/MK3S+ for Octoprint for use with articulated camera mount.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 251
- Wydruki
- 7
- Wyświetlenia
- 1424
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a modification of https://www.thingiverse.com/thing:3001109/files. To allow it to mount nicely on the MK3 frame using the two vertical M3 screw holes. FYI the vertical and horizontal scree holes are 43mm apart. I have added the base file here too for convenience but it is a copy of the base file of the original.
This places the USB slots at the bottom buy out of the way and allow a short 15cm / 10 cm USB B type connector to connect cleanly to the PI 3+. The camera ribbon cable also comes nicely out of the side suitable to attach to the camera mount found here. ND DO NOT PRINT THE THUMB NUT USE THE SMOOTH VERSION.
https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m
Hope this is useful to someone else.