Church for Hamlet boardgame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular church for the boardgame Hamlet
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 750
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Church for Hamlet boardgame
I am fairly sure I printed this with a 0.2mm nozzle, however it should still print fine with a 0.4mm, but you might lose some of the detail such as the windows in the towers.
The furniture was printed with a 0.2mm nozzle and about 0.8mm layer height. You could also try these in resin.
Shouldn't need any support, however paint a dot in the top of the arches if needed.
Magnets for the bases were 5mm x 1.5mm neodymium.
Printed on Bambu X1C in bone white, grey, brown, red, white and silk gold PLA.
Enjoy
31/1/24 added 2-part main building to house an LED. Battery is a CR2032, LED is 2.2v.