1 / 5
Prusa MK3S RPi4B mount for Geekworm Aluminium Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount designed for the compact aluminium RPI4B case by Geekworm
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 126
- Wydruki
- 2
- Wyświetlenia
- 1087
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (2)Kolekcje (49)Powiązane
A mount designed for the compact aluminium RPI4B case by Geekworm. It is designed to use the entire case without having to sacrifice a part of it resulting in better cooling. 2.5x12 or 16 screws can be used to connect the mount to the case. The included ones are too short.
Print Settings
I recommend using a brim as the sloped part tends to pull the print from the bed. PETG would be the prefered material to use as the part is load bearing and potentially subjected to temperatures that radiate from the case.