SnapMaker Quick Swap Skadis Tool Head Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and dirty model based on the DXF profile (thanks!)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A Skadis mounted holder for SnapMaker tool heads with the new(ish) Quick Swap plate system.
Quick and dirty and could be cleaned up with some more micro-alignment of some of the model components, but it does the job.
Uses the Skadis Universal Hook design so you'll need a couple of these (model included)
I've left enough space that it should also be compatible with the larger/taller tool heads.
No particular printing instructions. I used 2 perimeters, 15% gyroid infill with PETG, no supports, but mostly because those were the last settings I used in the slicer. It should also work fine with PLA.