1 / 4
Gridfinity Sewing Needle Box Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Assorted sewing needle box holder. Holds 3 varying sizes.
- Ocena
- 5 / 5
- Polubienia
- 242
- Pobrania
- 586
- Wydruki
- 4
- Wyświetlenia
- 2993
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 4) (Komentarze: 8)Remiksy (0)Kolekcje (471)Powiązane
Holds 3 sizes of containers for sewing needles in a 1x1 gridfinity square. Fits 1 6.5mm, 3 5.5mm, and 1 3.5mm box of needles. Sizing is based off what we had in the house, if you need a different assortment or all of one size feel free to message (or remix it).
I have had far more luck printing all my gridfinity pieces with the feet separately and glueing them together. Will upload a version with the foot attached later.
Enjoying adding on to the wonderful creation of Zack Freedman's Gridfinity
Gridfinity Tips!
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corner