Plug for Running boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dog safety plug for running boards. Storyteller Overland. Steelcraft. TAC.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a basic plug to fit Storyteller running boards. These running boards are sold under many names such as Steelcraft and TAC. I recommend to print with strength setting - multiple shells, low infill etc. I usually do as a two color print and make 50 at a time. Dog 1 is taller and more durable. Dog 2 is better for bare (human) feet.
These are designed for a tight fit and should not rattle. Use a rubber hammer or similar to insert. Your printer may have different calibrations and you might need to scale up or down a percent or two.