Sabfoil Kraken Hydrofoil Mast End Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slip on cover to protect the mast end when in transit
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I take apart my hydrofoil setup for transportation to and from the beach. Parts are often tossed in the back of the truck along with other things, so there's always the potential for damage.
I ride a project cedrus mast but use a Sabfoil fuselage and wings. This slip on cover should work for any of the newer Kraken masts with the T8 connection.
I left holes in the top to accommodate mast screws since I leave mine in there to avoid losing them.
I printed in TPU with a .4mm nozzle and .2mm layer height. 3 walls, 5 floor and top layers. 13% gyroid infill.