1 / 3
Measuring Sticks for Wargames & Miniature Games
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of 9 measuring sticks, from 2 to 10 inches long. They can be used for many miniatures games
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 848
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (33)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
The 2–9" sticks are 0.5" wide so they can fit between models.
The 10" stick is 30 mm wide, designed as a ball path for Guild Ball.
Two versions are included, one plain and one with our wargaming club logo.
These models are prepared for easy two-color printing with only one extruder, no MMU or multi-nozzle setup required.
Printer setup
- In Printer Settings → General, enable Single Extruder Multi Material.
- In Printer Settings → Custom G-code, make sure you have the following line under Tool change G-code:
M600 ; pause for manual filament change- The Wipe Tower can be enabled or disabled depending on your preference:
- Enabled: helps purge leftover filament automatically, but uses more material.
- Disabled: lets you purge manually and save filament, ideal for small color changes or flat inlays.
Print procedure
- Slice both color parts as separate objects assigned to different “tools” (for example, Tool 0 = color 1, Tool 1 = color 2).
- When the printer reaches the color change, it will pause automatically and let you swap filament manually.
- Purge the old color and load the new one. You can extrude a little by hand to clean the nozzle.
- Resume the print to continue with the next color.
- Check for any stringing or brim before starting the next stage.