Ukulele (needs some fine tuning)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Last year I made this ukulele by copying the exact dimensions of a ukulele I have. It's somewhat incomplete as, at the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Last year I made this ukulele by copying the exact dimensions of a ukulele I have. It's somewhat incomplete as, at the moment, the tuning pegs loses tuning a lot. This is likely due to poor design on the holders..... The spacing behind the frets are also only "kinda" workable...see my YT vid if you're interested in how it performs.
Note: screws were from whatever I had lying around though I do know that the big ones are from Ikea. he main body was held together mostly with elmer glue and it was enough as the fit is snug. The strings I bought off of amazon from whoever sold them the cheapest.
I'm just an amateur and am doing this for fun. If you want to see the process:
Part 1: original design (legacy) https://youtu.be/bFl6gDg2f1Q
Part 2: upgrade design (still a little flimpsy) https://youtu.be/uEWNhFKXT2I
****YOU WILL NEED A FEW SCREWS, I unforunately did not keep track of which ones I used, I simply found whatever was lying around and plugged it in. Sorry! This was my first design of a complete instrument****
Category: Music