1 / 3
Gridfinity Gluing Jig
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to glue several baseplates together to effectively cover a shallow drawer. I could use normal bins to hold them together, but then I would need to strategically place them so as to not accidentally blue the bin to the plate… this seemed easier.
I printed with my cheapest PLA with a large a nozzle and layer height as I thought I could get away with. Gridfinity bases are pretty forgiving, so anything should be fine.
You can tape the grid to the jig if you are extra paranoid about holding the piece down whilst it cures.