1 / 1
Hose Clip for Pupkus Force 2 Dryer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suitable for the hose connector of the Pupkus Force 1, 2 and 3 dryers (only tested on the Force 2) https://pupkus.com.au
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based off of the (easy to break) original measurements, but strengthened.
For the Pupkus Force 2 Dryer: https://pupkus.com.au/products/dryers/pupkus-force-2-dryer
Printed with Prusa PETG (Black).
- 60% Gyroid infill
- Supports not required
- DRAFT 0.25mm