1 / 13
UNICORN PIGGY BANK (NO SUPPORTS + FOR MOUNTING ON WALL) — zdjęcie 1
1 / 13

UNICORN PIGGY BANK (NO SUPPORTS + FOR MOUNTING ON WALL)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combine useful with good look - Unicorn piggy bank that can be mounted on the wall. It will look as amazing unicorn deco

Ocena
0 / 5
Polubienia
7
Pobrania
27
Wydruki
0
Wyświetlenia
466
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Combine useful with good look - Unicorn piggy bank that can be mounted on the wall. It will look as amazing unicorn decor, but secretly it will double as a piggy bank!

This design includes 3 files:
1) main file - the piggy bank
2) bolt - to use to seal the piggy bank
3) Hole marker - to help you mark the hole place for the screws.

3D PRINTING SETTINGS

Unicorn piggy bank main:

NO SUPPORTS
NO BRIM
Print Dimensions: Height = 14.5 cm (5.71 Inches) | Base = 10.5 cm x 18.2cm (4.13 Inches x 7.16 Inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 3 hours and 45 Minutes
Amount of material required: ~ 35.5 m

Bolt piece:

NO SUPPORTS
NO BRIM
Print Dimensions: Height = 13.9 cm (5.47 Inches) | Base = 18.7 cm x 13.5 cm (7.36 Inches x 5.32 Inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 19 Minutes
Amount of material required: ~ 2.5 m

Marker for holes:

NO SUPPORTS
NO BRIM
Print Dimensions: Height = 0.2 cm (0.08Inches) | Base = 5 cm x 2 cm (1.97 Inches x 0.79 Inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 10 Minutes
Amount of material required: ~ 0.5 m

TOTAL PRINT TIME: 4 HOURS AND 14 MINUTES
TOTAL MATERIAL USED: 38.5 M

Tagi