1 / 1
Gunpla HSW Mount (Remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Love Gunpla? Have HSW? Well, here ya go!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
I liked this design but it made the model sit too far from the wall for my taste. So I shortened the arm and added a honeycomb base at the end. The original mount to the HSW plug is the same and super tight so I would recommend tapping it in with force or sanding down the mount point.
If the hole at the end is too tight for the cut sprue sand until it's tight or chuck the sprue in a drill and heat weld it in.
The Hex adapter is needed from the original designer on Cults!
Added a super short version