1 / 1
HappyModel Fyujon V2 25.5mm (M2) Mount Hole Drill Jig — zdjęcie 1

HappyModel Fyujon V2 25.5mm (M2) Mount Hole Drill Jig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Jig to drill holes on the PCB to allow for 25.5mm mounting using M2 screws

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
315
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Jig to drill holes on the PCB “wings” to allow for 25.5mm mounting using M2 screws.

Required Hardware:

  1. 2 units 20mm M3 screws
  2. 2 units M3 nuts 

Print 2 of the jigs and pre-drill the outer larger holes using a 3mm drill bit. Pre-drill the middle hole using 2mm drill bit.

Ensuring the “arrow” of the jig is pointing away from the PCB, clamp the PCB with the printed jigs and fix the M3 screws in the larger holes. SLOWLY drill the PCB using the middle hole of the jig with the 2mm drill bit. Once drilled, remove the M3 screws and jig.