1 / 4
M54x0.75 threaded dust caps, male and female — zdjęcie 1
1 / 4

M54x0.75 threaded dust caps, male and female

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M54x0.75 threaded dust caps, male and female, for astronomy.

Ocena
5 / 5
Polubienia
9
Pobrania
250
Wydruki
1
Wyświetlenia
455
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

M54x0.75 threaded dust caps, male and female, for astronomy.

These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is often used for full-frame cameras and many refractors.

I print these dust caps out of PLA+ and have found that the threads print nicer in PLA+ vs PETG and that sometimes the threads are so fine that they don't fit as well with PETG. YMMV. Try enlarging/reducing the X/Y axes by 0.5% if they are too loose or tight.

I'm uploading many sizes that I've used on my various telescopes and cameras.

 

Tagi