1 / 4
M63x1 threaded dust caps, male and female — zdjęcie 1
1 / 4

M63x1 threaded dust caps, male and female

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M63x1 threaded dust caps, male and female, for astronomy.

Ocena
0 / 5
Polubienia
2
Pobrania
95
Wydruki
0
Wyświetlenia
240
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

M63x1 threaded dust caps, male and female, for astronomy.

These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is often used on refractors such as Stellarvue, William Optics, TS-Optics, Sharpstar & Askar. It is also used on Feather Touch 2.5" focuser drawtubes.

I print these dust caps out of PLA+ and have found that the threads print nicer in PLA+ vs PETG and that sometimes the threads are so fine that they don't fit as well with PETG. YMMV. Try enlarging/reducing the X/Y axes by 0.5% if they are too loose or tight.

I'm uploading many sizes that I've used on my various telescopes and cameras.

Tagi