1 / 4
M75x1 threaded dust caps, male and female - Feather Touch 3.0" focuser — zdjęcie 1
1 / 4

M75x1 threaded dust caps, male and female - Feather Touch 3.0" focuser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M75x1 threaded dust caps, male and female, for Feather Touch 3.0" focuser for astronomy.

Ocena
0 / 5
Polubienia
1
Pobrania
32
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

M75x1 threaded dust caps, male and female, for astronomy.

These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is used on Feather Touch 3.0" focusers.

I print these dust caps out of PLA+ and have found that the threads print nicer in PLA+ vs PETG and that sometimes the threads are so fine that they don't fit as well with PETG. YMMV. Try enlarging/reducing the X/Y axes by 0.5% if they are too loose or tight.

I'm uploading many sizes that I've used on my various telescopes and cameras.

Tagi