1 / 4
M97x1 threaded dust caps, male and female - Stellarvue — zdjęcie 1
1 / 4

M97x1 threaded dust caps, male and female - Stellarvue

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M97x1 threaded dust caps, male and female, for astronomy.

Ocena
0 / 5
Polubienia
1
Pobrania
30
Wydruki
0
Wyświetlenia
111
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

M97x1 threaded dust caps, male and female, for astronomy.

These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is used on Stellarvue on SVX080T telescopes for front cap.

I print these dust caps out of PLA+ and have found that the threads print nicer in PLA+ vs PETG and that sometimes the threads are so fine that they don't fit as well with PETG. YMMV. Try enlarging/reducing the X/Y axes by 0.5% if they are too loose or tight.

I'm uploading many sizes that I've used on my various telescopes and cameras.

Tagi