2"-24 threaded dust caps, male and female - Schmidt-Cassegrain Telescope (SCT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2"-24 threaded dust caps, male and female, for astronomy.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 345
- Wydruki
- 0
- Wyświetlenia
- 804
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
SCT 2"-24 threaded dust caps, male and female, for astronomy.
These threaded dust caps are useful for astronomy telescopes and adapters. This thread size is used on smaller Schmidt-Cassegrain Telescopes (SCT) in the 5" - 10" sizes. It is used on the regular Celestron 9.25" SCTs, but not the EdgeHD 9.25" models.
I print these dust caps out of PLA+ and have found that the threads print nicer in PLA+ vs PETG and that sometimes the threads are so fine that they don't fit as well with PETG. YMMV. Try enlarging/reducing the X/Y axes by 0.5% if they are too loose or tight.
I'm uploading many sizes that I've used on my various telescopes and cameras.