Celestron 3.29"-16 threaded dust caps, male and female - large Celestron SCTs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Celestron 3.29"-16 threaded dust caps, male and female, for Celestron Schmidt-Cassegrain Telescopes (SCT).
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
Celestron 3.29"-16 threaded dust caps, male and female, for Celestron Schmidt-Cassegrain Telescopes (SCT).
These threaded dust caps are useful for astronomy telescopes and adapters. This thread size is used on larger Celestron Schmidt-Cassegrain Telescopes (SCT). It is used on the EdgeHD 9.25" models (but not regular 9.25" models), and all larger Celestron SCTs. The thread size is 3.29"-16tpi which is very similar to the Meade 3.25"-16tpi threads for their large SCTs. They are very similar threads and are sometimes interchangeable.
I print these dust caps out of PLA+ and have found that the threads print nicer in PLA+ vs PETG and that sometimes the threads are so fine that they don't fit as well with PETG. YMMV. Try enlarging/reducing the X/Y axes by 0.5% if they are too loose or tight.
I'm uploading many sizes that I've used on my various telescopes and cameras.