RaspiCam Raspberry camera v1.3 module tripod case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had some trouble finding a raspberry camera case for a tripod that fits the camera module I have. So after a few…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some trouble finding a raspberry camera case for a tripod that fits the camera module I have.
So after a few tries I made my own :)
Since the existing cases did not fit my module there is a good chance that the opposite is true as well, if your camera module is different then mine it might not fit!
Make sure you check your dimensions, the mounting holes for my module are 20.8mm and 12.6mm apart. (I included an image with the mounting dimensions to see what I mean)
My module is a bit older, a raspberry pi camera module v1.3 (5mp Omnivision 5647 1920x1080)
To mount this you'll need 4 M2 20mm bolts and 4 M2 nuts.
The mount has a printed 1/4"-20 UNC thread (common thread size for compact camera's tripods) The thread is looser then I hoped but with some wiggling it worked :)
https://pinshape.com/items/34349-3d-printed-raspberry-pi-logo was used for the raspberry logo - Thanks for this :)
Print Settings
Printer:
Geeetech A20M
Supports:
No
Resolution:
0.2mm
Category: Camera