CYD Display mount for Tiny-M Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CYD Display mount for Tiny-M V0 Voron
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Tiny-M owners, here is a screen mount to use the newly released CYD Klipper display. I is a low cost alternative to Klipperscreen. While it is less feature-rich, its $10 to $15 price tag is very appealing.
The install instructions can be found here:
https://github.com/suchmememanyskill/CYD-Klipper
Needed Hardware: 4x M3 6mm screws, 2x M4 10-12mm, 2x M4 t-nuts (any type)
Optional Harware: 4x M3 heat set inserts
There are two options for fasters: One front bezel uses heat set inserts and the other option allows the M3 screws to be threaded into the plastic (not preferred).
Note: There will not be enough room for a USB power cable. You will need to supply power via the red/black wires of the included cable. See image.
Assembly: insert the screen into the front bezel then slide that assembly into the mount. Insert the 4 M3 retaining screws from the back.