1 / 5
Jog Wheel for Kenwood CR-ST100S WiFi Radio (Print-In-Place) — zdjęcie 1
1 / 5

Jog Wheel for Kenwood CR-ST100S WiFi Radio (Print-In-Place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Received my web-radio few days ago. Operating the knobs is pretty lousy, They only rise 3.5mm above the plane.

Ocena
5 / 5
Polubienia
1
Pobrania
20
Wydruki
1
Wyświetlenia
172
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Received my web-radio few days ago. Operating the knobs is pretty lousy, They only rise 3.5mm above the plane. Who has fingers that slim-line type? Ha?

Designed a new knob to be reversibly imposed over the existing knobs. A Print-In-Place jog knob makes jogging really easy.

Designed with TinkerCad. Printed on my Prusa MK4 in Eryone black PLA. Layerheight 0.1mm, knob lying on the buildplate, mold of the jog knob supported with organic support.

Slice with Prusa Slicer in “0.10mm FAST DETAIL” settings. Shut speed down to 140mm/sec and less. 2 perimeters 7 top, 8 bottom layers. After 2-3 layers I reduced the flow for 3% (100%→ 97%, resp. 95%→94%) for better release of the PIP function. After print put into my fridge (-18°) for 10 minutes, then carefully wiggled the jog knob from both sides to break free any random connections, carefully hammered with a same size cyclinder until the jog junction was working. After some more operating blew out dust from the slit and eventually put some sanitary grease into the slit for smoother operation.

Enjoy the music and have a happy printing.

Explore my other Printables: https://www.printables.com/de/@Tritschi