1 / 7
Appendino da scrivania per borse o zaini / Desk hanger for bags or backpacks — zdjęcie 1
1 / 7

Appendino da scrivania per borse o zaini / Desk hanger for bags or backpacks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Desk hanger for bags or backpacks

Ocena
0 / 5
Polubienia
12
Pobrania
83
Wydruki
0
Wyświetlenia
857
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Materiale utilizzato PLA ma consiglio il PETG per maggior resistenza e minor flessione se volete esagerare per ridurre al massimo la flessione e la possibilità che si rompa ABS o Nylon.

Layer 0.2

Supporti da abilitare  

Misure dell'incastro 18mm eventualmente per ridurre larghezza incastro mettere dei feltrini.

 

Material used PLA but I recommend PETG for greater resistance and less bending if you want to exaggerate to minimize bending and the possibility of ABS or Nylon breaking.

Layer 0.2

Supports to be enabled

Joint dimensions 18 mm, if necessary, use felt pads to reduce the width of the joint.

Tagi