Prusa Bear Reverse Bowden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had been using the standard reverse bowden on my Prusa Bear for a long time but the filament had to make a sharp…
- Ocena
- 4,75 / 5
- Polubienia
- 44
- Pobrania
- 234
- Wydruki
- 5
- Wyświetlenia
- 2523
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I had been using the standard reverse bowden on my Prusa Bear for a long time but the filament had to make a sharp turn from the roll into the tube for my setup. This caused issues for carbon fiber filled materials as they tend to be more brittle on the roll. So I designed this real quick.
Enjoy.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
200
Infill:
20
Filament:
Any PETG Any
Notes:
Print this how you see fit. I recommend some supports at the opening of the hole for the M5 screw.
Category: 3D Printer Parts